Cisco Sx350

Bonjour Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 206
7
Parameters
• interface-list —Specifies a list of interfaces. Only interfaces supporting L2
Multicast forwarding can be specified. The follow: LAN and point, which
support be of the following types: Ethernet port, Port-channel, and VLAN.
Default Configuration
The list includes the Default VLAN.
Command Mode
Global Configuration mode
User Guidelines
The Bonjour L2 interface list specifies a set of interfaces on which Bonjour is
enabled.
Use the bonjour interface range
interface-list command, to add the specified
interfaces to the Bonjour L2 interface list.
Use the no bonjour interface range
interface-list command, to remove the
specified interfaces from the Bonjour L2 interface list.
Use the no bonjour interface range command, to clear the Bonjour L2 interface list.
Examples
switchxxxxxx(config)# bonjour interface range VLAN 100-103
7.3 show bonjour
To display Bonjour information, use the show bonjour command in Privileged EXEC
mode.
Syntax
show bonjour [
interface-id ]
Parameters
• interface-id —Specifies an interface.