Cisco Sx350

21
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 466
IGMP Commands
21.0
21.1 clear ip igmp counters
To clear the Internet Group Management Protocol (IGMP) interface counters, use
the clear ip igmp counters command in Privileged EXEC mode.
Syntax
clear ip igmp counters
[ interface-id ]
Parameters
• interface-id —(Optional) Interface Identifier
Command Mode
Privileged EXEC mode
User Guidelines
Use the clear ip igmp counters command to clear the IGMP counters, which keep
track of the number of joins and leaves received. If you omit the optional
interface-id argument, the clear ip igmp counters command clears the counters on
all interfaces.
Example
The following example clears the counters for VLAN 100:
switchxxxxxx# clear ip igmp counters vlan 100