Cisco Sx350

File System Commands
429 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
18
Example 2. The following example saves the Startup configuration file in the
tftp://172.16.101.101/config.txt file:
switchxxxxxx# copy startup-config tftp://172.16.101.101/config.txt
include-encrypted
Example 3. The following example copies the Running Configuration file to the
Startup configuration:
switchxxxxxx# copy running-config startup-config
Example 4. The following example copies the Syslog file to a TFTP server:
switchxxxxxx# copy logging tftp://1.1.1.1/syslog.txt
Example 5. The following example copies a file from the mass-storage device
connected to the USB port to Flash:
switchxxxxxx# copy usb://aaa/file1.txt flash://dir1/file2
18.8 delete
To delete a local file, use the delete command in Privileged EXEC mode.
Syntax
delete
url
delete startup-config
delete localization
Parameters
• url —Specifies the local URL of the local file to be deleted. The predefined
and network URLs cannot be configured.