Cisco Sx350

GARP VLAN Registration Protocol (GVRP) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 458
19
gi1 3 0 0 0 0 0
gi1 4 0 0 0 0 0
19.8 show gvrp statistics
To display GVRP statistics for all interfaces or for a specific interface, use the show
gvrp statistics EXEC mode command.
Syntax
show gvrp statistics
[interface-id]
Parameters
interface-id—(Optional) Specifies an interface ID. The interface ID can be one of
the following types: Ethernet port or Port-channel.
Default Configuration
All GVRP statistics are displayed.
Command Mode
User EXEC mode
Example
The following example displays GVRP statistical information.
switchxxxxxx# show gvrp statistics
GVRP statistics:
----------------
Legend:
rJE :
rEmp:
rLE :
sJE :
sEmp:
sLE :
Join Empty Received
Empty Received
Leave Empty Received
Join Empty Sent
Empty Sent
Leave Empty Sent
rJIn: Join In Received
rLIn: Leave In Received
rLA : Leave All Received
sJIn: Join In Sent
sLIn: Leave In Sent
sLA : Leave All Sent