Cisco Sx350

File System Commands
449 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
18
speed 1000
exit
no lldp run
interface vlan 1
ip address 1.1.1.1 255.0.0.0
exit
line console
exec-timeout 0
exit
switchxxxxxx#
18.21 show startup-config
To display the Startup Configuration file contents, use the show startup-config
command in Privileged EXEC mode.
Syntax
show startup-config [interface
interface-id-list ]
Parameters
• interface interface-id-list —Specifies a list of interface IDs. The interface IDs
can be one of the following types: Ethernet port, port-channel or VLAN.
Command Mode
Privileged EXEC mode
Example
The following example displays the startup configuration file contents.
switchxxxxxx# show startup-config
config-file-header
AA307-02
v1.2.5.76 / R750_NIK_1_2_584_002
CLI v1.0
file SSD indicator encrypted