Cisco Sx350

802.1X Commands
83 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
3
3.3 clear dot1x statistics
To clear 802.1X statistics, use the clear dot1x statistics command in Privileged
EXEC mode.
Syntax
clear dot1x statistics [i
nterface-id ]
Parameters
• interface-id —Specify an Ethernet port ID.
Default Configuration
Statistics on all ports are cleared.
Command Mode
Privileged EXEC mode
User Guidelines
This command clears all the counters displayed in the
show dot1x and show dot1x
statistics
command.
Example
switchxxxxxx# clear dot1x statistics
3.4 data
To specify web-based page customizing, the data command is used in
Web-Based Page Customization Configuration mode.
Syntax
data
value
Parameters
• value —String of hexadecimal digit characters up to 320 characters.