Cisco Sx350

Web Server Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1320
69
Example
The following example configures the http timeout to be 1000 seconds.
switchxxxxxx(config)# ip http timeout-policy 1000
69.6 show ip http
To display the HTTP server configuration, use the show ip http Privileged EXEC
mode command.
Syntax
show ip http
Parameters
This command has no arguments or keywords.
Command Mode
Privileged EXEC mode
Example
The following example displays the HTTP server configuration.
switchxxxxxx# show ip http
HTTP server enabled
Port: 80
Interactive timeout: 10 minutes
69.7 show ip https
To display the HTTPS server configuration, use the show ip https Privileged
Privileged EXEC mode command.