Cisco Sx350

SSD Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1162
60
Level-15 secure Both Encrypted Default
Level-15 insecure Both Encrypted Default
All secure Encrypted-Only Encrypted Default
All insecure Encrypted-Only Encrypted Default
All insecure-xml-snmp Plaintext-Only Plaintext *Default
* Modified default entry
Example 3 - The following example displays the SSD attributes.
switchxxxxxx(config-ssd)# show ssd brief
SSD current parameters:
Local Passphrase: Default
File Passphrase Control: Unrestricted
File Integrity Control: Disabled
SSD parameters after reset:
Local Passphrase: Default
File Passphrase Control: Unrestricted
File Integrity Control: Disabled
60.5 ssd session read
To override the current SSD default read of the current session, use ssd session
read in Global Configuration mode.
Syntax
ssd session read {
encrypted | plaintext | exclude }
no ssd session read
Parameters
• encrypted—Override the SSD default option to encrypted
• plaintext—Override the SSD default option to plaintext
• exclude—Override the SSD default option to exclude