Cisco Sx350

IPv6 Commands
595 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
28
---- ---------------- ---- --------------- -----------------------
default LA 2592000 604800
AR 2001:0DB8:1::/64 LA infinite infinite
APR 2001:0DB8:2::/64 LA infinite infinite
AP 2001:0DB8:3::/64 A infinite infinite
PR 2001:0DB8:4::/64 LA 2592000 604800
P 2001:0DB8:5::/64 A 2912000 564900
28.31 show ipv6 link-local default zone
Use the show ipv6 link-local default zone command in user EXEC or privileged
EXEC mode to display the IPv6 link local default zone.
Syntax
show ipv6 link-local default zone
Command Mode
User EXEC mode
Privileged EXEC mode
Examples
Example 1. The following example displays the default zone when it is defined:
switchxxxxxx# show ipv6 link-local default zone
Link Local Default Zone is VLAN 1
Example 2. The following example displays the default zone when it is not defined:
switchxxxxxx# show ipv6 link-local default zone
Link Local Default Zone is not defined