Cisco Sx350 User Manual

System Management Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1198
62
Command Mode
User EXEC mode
Example
The following example displays TCAM utilization information.
62.15 show services tcp-udp
To display information about the active TCP and UDP services, use the show
services tcp-udp Privileged EXEC mode command.
Syntax
show services tcp-udp
Parameters
This command has no arguments or keywords.
Command Mode
Privileged EXEC mode
User Guidelines
The output does not show sessions where the device is a TCP/UDP client.
Examples
switchxxxxxx> show services tcp-udp
Type Local IP Address Remote IP address Service Name State
---------------------- ------------------- ------------- -----------
TCP All:22 SSH LISTEN
TCP All:23 Telnet LISTEN
TCP All:80 HTTP LISTEN
switchxxxxxx> show system tcam utilization
TCAM utilization: 58%

Cisco Sx350 Specifications

General

Brand	Cisco
Model	Sx350
Category	Switch
Language	English