Cisco Sx350

System Management Commands
1201 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
62
Example 1: For devices whose hardware supports variable fan speed.
switchxxxxxx> show system fans
Unit Speed State
(RPM)
--- --------- ------------------
1 8000 Fans OK, redundant fan ready
62.18 show system sensors
To view the temperature sensor status, use the show system sensors EXEC mode
command.
Syntax
show system sensors
Parameters
This command has no arguments or keywords.
Default Usage
None
Command Mode
User EXEC mode
Examples
For Standalone systems with a single sensor status
switchxxxxxx> show system sensors
Sensor Status: OK