Cisco Sx350

Smartport Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1076
55
ip_phone :enabled
ip_phone_desktop:enabled
switch :enabled
router :disabled
ap :enabled
55.14 show macro auto smart-macros
The show macro auto smart-macros EXEC mode command displays the name of
Smartport macros, their type (built-in or user-defined) and their parameters. This
information is displayed for all Smartport types or for the specified one.
Syntax
show macro auto smart-macros [
smartport-type ]
Parameters
• smartport-type —Smartport type (range: printer, desktop, guest, server,
host, ip_camera, ip_phone, ip_phone_desktop, switch, router or wireless
access point (ap)).
Default Configuration
None
Command Mode
User EXEC mode
Example
switchxxxxxx# show macro auto smart-macros
SG300-52-R#show macro auto smart-macros
SmartPort type : printer
Parameters : $native_vlan=1
SmartPort Macro: printer (Built-In)
SmartPort type : desktop
Parameters : $max_hosts=10 $native_vlan=1