Cisco Sx350

IPv6 First Hop Security
707 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
29
Syntax
show ipv6 nd raguard
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
The following example gives an example of the show ipv6 nd raguard command
output:
switchxxxxxx# show ipv6 nd raguard
IPv6 RA Guard is enabled on VLANs:1-4,6,7,100-120
"Managed address configuration" flag (M-flag:) off
"Other configuration" flag (O-flag): disabled
Hop Limit:
minimum: 10
maximum: 100
Default Router Preference:
minimum: 1
maximum: 1
29.75 show ipv6 nd raguard policy
To display a router advertisements (RAs) guard policy on all ports configured with
the RA guard feature, use the show ipv6 nd raguard policy command in privileged
EXEC mode.
Syntax
show ipv6 nd raguard policy [
policy-name | active]