Cisco Sx350

Authentication, Authorization and Accounting (AAA) Commands
189 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
5
Example
switchxxxxxx(config)# aaa accounting dot1x start-stop group radius
5.14 show accounting
The show accounting EXEC mode command displays information as to which type
of accounting is enabled on the switch.
Syntax
show accounting
Parameters
N/A
Default Configuration
N/A
Command Mode
User EXEC mode
Example
The following example displays information about the accounting status.
Acct-Authentic (45) Yes Yes Indicates how the
supplicant was
authenticated.
Acct-Session-Time (46) No Yes Indicates how long the
supplicant was logged
in.
Acct-Terminate-Cause
(49)
No Yes Reports why the
session was
terminated.
Nas-Port-Type (61) Yes Yes Indicates the supplicant
physical port type.
Name Start Stop Description