Cisco Sx350

Address Table Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 146
4
Parameters
• filtering—Filter unregistered Unicast packets.
• forwarding—Forward unregistered Unicast packets.
Default Configuration
Forwarding.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode.
Example
The following example drops Unicast packets on gi11 when the destination is
unknown.
switchxxxxxx(config)# interface gi11
switchxxxxxx(config-if)# bridge unicast unknown filtering
4.18 show bridge unicast unknown
To display the unknown Unicast filtering configuration, use the show bridge unicast
unknown Privileged EXEC mode command.
Syntax
show bridge unicast unknown [
interface-id ]
Parameters
interface-id —(Optional) Specify an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel
Command Mode
Privileged EXEC mode
Example