Cisco Sx350 User Manual

GARP VLAN Registration Protocol (GVRP) Commands
453 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
19
19.2 gvrp enable (Global)
To enable the Generic Attribute Registration Protocol (GARP) VLAN Registration
Protocol (GVRP) globally, use the gvrp enable Global Configuration mode
command. To disable GVRP on the device, use the no form of this command.
Syntax
gvrp enable
no gvrp enable
Parameters
This command has no arguments or keywords.
Default Configuration
GVRP is globally disabled.
Command Mode
Global Configuration mode
Example
The following example enables GVRP globally on the device.
switchxxxxxx(config)# gvrp enable
19.3 gvrp enable (Interface)
To enable GVRP on an interface, use the gvrp enable Interface (Ethernet, Port
Channel) Configuration mode command. To disable GVRP on an interface, use the
no form of this command.
Syntax
gvrp enable
no gvrp enable

Cisco Sx350 Specifications

General

Brand	Cisco
Model	Sx350
Category	Switch
Language	English