Cisco Sx350

SSD Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1158
60
Please reenter SSD passphrase:**********
60.3 ssd rule
To configure an SSD rule, use ssd rule in SSD Configuration mode. A device grants
read permission of sensitive data to users based on the SSD rules. A user that is
granted Both or Plaintext read permission is also granted permission to enter SSD
Configuration mode.
To delete user-defined rules and restore default rules, use no ssd rule.
Syntax
[encrypted] SSD rule {
all | level-15 | default-user | user user-name }
{
secure | insecure | secure-xml-snmp | insecure-xml-snmp}
permission { encrypted-only | plaintext-only | both | exclude }
default - read { encrypted | plaintext | exclude }
no ssd rule [ {
all | level-15 | default-user | user user-name }
{ secure | insecure | secure-xml-snmp | insecure-xml-snmp }]
Command Mode
SSD Configuration mode.
Default Rules
The device has the following factory default rules:
Table 4: Default SSD Rules
Rule Key Rule Action
User Channel Read Permission Default Read Mode
level-15 secure-xml-snmp Plaintext Only Plaintext
level-15 secure Both Encrypted
level-15 insecure Both Encrypted
all insecure-xml-snmp Exclude Exclude
all secure Encrypted Only Encrypted
all insecure Encrypted Only Encrypted