Cisco Sx350

CDP Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 234
8
8.21 show cdp traffic
To display the CDP counters, including the number of packets sent and received
and checksum errors, use the show cdp traffic command in Privileged EXEC
mode.
Syntax
show cdp traffic [global |
interface-id ]
Parameters
• global—Display only the global counters
• interaface-id —Port for which counters should be displayed.
Command Mode
Privileged EXEC mode
User Guidelines
Use the command show cdp traffic without parameters to display all the counters.
Use the show cdp traffic global to display only the global counters.
Use the show cdp traffic
interface-id command to display the counters of the
given port.
Example
switchxxxxxx# show cdp traffic
CDP Global counters:
Total packets output: 81684, Input: 81790
Hdr syntax: 0, Chksum error: 0, Invalid packet: 0
No memory in main cache: 0, in secondary cache: 0
CDP version 1 advertisements output: 100, Input 0
CDP version 2 advertisements output: 81784, Input 0
gi11
Total packets output: 81684, Input: 81790
Hdr syntax: 0, Chksum error: 0, Invalid packet: 0