Cisco Sx350

DHCP Snooping Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 346
13
Example
The following example displays the static ARP binding list.
13.29 show ip arp inspection statistics
Use the show ip arp inspection statistics EXEC command to display statistics for
the following types of packets that have been processed by this feature:
Forwarded, Dropped, IP/MAC Validation Failure.
Syntax
show ip arp inspection statistics
[ vlan vlan-id ]
Parameters
• vlan-id —Specifies VLAN ID.
Command Mode
User EXEC mode
User Guidelines
To clear ARP Inspection counters use the clear ip arp inspection statistics
command. Counters values are kept when disabling the ARP Inspection feature.
Example
switchxxxxxx# show ip arp inspection statistics
Vlan Forwarded Packets Dropped Packets IP/MAC Failures
---- -----------------------------------------------
switchxxxxxx# show ip arp inspection list
List name: servers
Assigned to VLANs: 1,2
IP
-----------
172.16.1.1
172.16.1.2
ARP
--------------
0060.704C.7322
0060.704C.7322