IPv6 Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 602
28
ACL Name: ACLTCPHTTP
Next Hop: 3004:1241::73
Next Hop Status: Active
VLAN 200
Route Map: BPR_A0
Status: Active
ACL Name: ACLTCPHTTP
Next Hop: 3004:1241::73
Next Hop Status: Active
IPv6 Routing Table - 3 entries
S> 3000::/64 [1/1]
via FE80::A8BB:CCFF:FE02:8B00 VLAN 100
C> 4001::/64 [0/0]
via :: VLAN 100
L> 4002::/64 [0/0]
via :: VLAN 100 Lifetime 9000 sec
28.35 show ipv6 route summary
Use the show ipv6 route summary command in User EXEC or Privileged EXEC
mode to display the current contents of the IPv6 routing table in summary format.
Syntax
show ipv6 route summary
Parameters
N/A.
Command Mode
User EXEC mode
Privileged EXEC mode
To Next Page
Loading...
