Address Table Commands
165 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
4
Command Mode
Privileged EXEC mode
Example
The following example displays the Multicast configuration for VLAN 1.
4.31 show bridge multicast unregistered
To display the unregistered Multicast filtering configuration, use the show bridge
multicast unregistered Privileged EXEC mode command.
Syntax
show bridge multicast unregistered
[
interface-id
]
Parameters
interface-id
—(Optional) Specifies an interface ID. The interface ID can be one of
the following types: Ethernet port or Port-channel.
Default Configuration
Display for all interfaces.
Command Mode
Privileged EXEC mode
switchxxxxxx#
show bridge multicast filtering
1
Filtering: Enabled
VLAN: 1
Forward-All
Port
-----
gi11
gi12
gi13
Static
---------
Forbidden
Forward
-
Status
------
Filter
Forward(s)
Forward(d)
To Next Page
Loading...
Need help?
General
