DHCP Snooping Commands
329 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
13
DHCP snooping file update frequency is configured to: 6666 seconds
13.10 show ip dhcp snooping binding
Use the show ip dhcp snooping binding User EXEC mode command to display the
DHCP Snooping binding database and configuration information for all interfaces
or for a specific interface.
Syntax
show ip dhcp snooping binding
[mac-address
mac-address
] [ip-address
ip-address
] [vlan
vlan-id
] [
interface-id
]
Parameters
• mac-address
mac-address
—Specifies a MAC address.
• ip-address
ip-address
—Specifies an IP address.
• vlan
vlan-id
—Specifies a VLAN ID.
•
interface-id
—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
User EXEC mode
Interface
---------
gi11
gi12
Trusted
-------
Yes
Yes
To Next Page
Loading...
