Cisco Sx350

IP Addressing Commands
517 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
24
Example
The following example enables the forwarding of UDP Broadcast packets
received on all interfaces to the UDP ports of a destination IP address and UDP
port 1 and 2.
switchxxxxxx(config)# ip helper-address all 172.16.9.9 49 53 1 2
24.15 show ip helper-address
Use the show ip helper-address Privileged EXEC mode command to display the IP
helper addresses configuration on the system.
Syntax
show ip helper-address
Parameters
This command has no arguments or key words.
Command Mode
Privileged EXEC mode
User Guidelines
Example
The following example displays the IP helper addresses configuration on the
system:
switchxxxxxx# show ip
Interface
------------
192.168.1.1
192.168.2.1
Helper Address
--------------
172.16.8.8
172.16.9.9
UDP Ports
------------------------
37, 42, 49, 53, 137, 138
37, 49