DHCP Server Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 314
12
Example
switchxxxxxx#
show ip dhcp expired
DHCP server enabled
The number of expired entries is 1
IP address Hardware address
172.16.1.11 00a0.9802.32de
172.16.3.254 02c7.f800.0422
switchxxxxxx#
show ip dhcp expired 172.16.1.11
DHCP server enabled
The number of expired entries is 1
IP address Hardware address
172.16.1.13 00a0.9802.32de
12.26 show ip dhcp pool host
To display the DHCP pool host configuration, use the show ip dhcp pool host
command in User EXEC mode.
Syntax
show ip dhcp pool host [
address
|
name
]
Parameters
•
address
—(Optional) Specifies the client IP address.
•
name
—(Optional) Specifies the DHCP pool name. (Length: 1-32 characters)
Command Mode
User EXEC mode
To Next Page
Loading...
Need help?
General
