Cisco Sx350

File System Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 436
18
This command will reset the whole system and disconnect your current session.
Do you want to continue? (Y/N) [Y]
Example 2. The following example reloads the image in 10 minutes:
switchxxxxxx# reload in 10
This command will reset the whole system and disconnect your current session.
Reload is scheduled for 11:57:08 UTC Fri Apr 21 2012 (in 10 minutes). Do you
want to continue? (Y/N) [Y]
Example 3. The following example reloads the image at 12:10 24 Aug:
switchxxxxxx# reload at 12:10 24 Aug
This command will reset the whole system and disconnect your current session.
Reload is scheduled for 12:10:00 UTC Sun Aug 24 2014 (in 1 hours and 12
minutes). Do you want to continue ? (Y/N)[N]
Example 4. The following example reloads the image at 13:00:
switchxxxxxx# reload at 13:00 soft
This command will reset the whole system and disconnect your current session.
Reload is scheduled for 13:00:00 UTC Fri Apr 21 2012 (in 1 hour and 3
minutes). Do you want to continue? (Y/N) [Y]
Example 5. The following example cancels a reload.
switchxxxxxx# reload cancel
Reload cancelled.
18.14 rename
To rename a local file or directory, use the rename command in Privileged EXEC
mode.