Smartport Commands
1075 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
55
switchxxxxxx(config-if)#
end
switchxxxxxx#
show macro auto ports
gi11
SmartPort is Enabled
Administrative Globally Auto SmartPort is enabled
Operational Globally Auto SmartPort is enabled
Auto SmartPort is enabled on gi11
Persistent state is persistent
Interface type is switch
Last activated macro is switch
55.13 show macro auto processing
The show macro auto processing EXEC mode command displays information
about which protocols (CDP/LLDP) are enabled and which device types can be
detected automatically.
Syntax
show macro auto processing
Parameters
This command has no parameters or keywords.
Default Configuration
None
Command Mode
User EXEC mode
Example
switchxxxxxx#
show macro auto processing
CDB: enabled
LLDP: enabled
host :disabled
To Next Page
Loading...
