Cisco Sx350

DHCP Server Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 318
12
47 hex 5 02af00aa00
12.28 show ip dhcp pre-allocated
To display the specific pre-allocated address or all the pre-allocated addresses
on the DHCP server, use the show ip dhcp pre-allocated command in User EXEC
mode.
Syntax
show ip dhcp pre-allocated [
ip-address ]
Parameters
• ip-address —(Optional) Specifies the IP.
Command Mode
User EXEC mode
Examples
switchxxxxxx# show ip dhcp pre-allocated
DHCP server enabled
The number of pre-allocated entries is 1
IP address Hardware address
172.16.1.11 00a0.9802.32de
172.16.3.254 02c7.f800.0422
switchxxxxxx# show ip dhcp pre-allocated 172.16.1.11
DHCP server enabled
The number of pre-allocated entries is 1
IP address Hardware address
172.16.1.15 00a0.9802.32de