Cisco Sx350

Authentication, Authorization and Accounting (AAA) Commands
187 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
5
The following table describes the supported TACACS+ accounting arguments
and in which messages they are sent by the switch.
Example
switchxxxxxx(config)# aaa accounting login start-stop group radius
5.13 aaa accounting dot1x
To enable accounting of 802.1x sessions, use the aaa accounting dot1x Global
Configuration mode command. Use the no form of this command to disable
accounting.
Syntax
aaa accounting dot1x start-stop group radius
no aaa accounting dot1x start-stop group radius
Parameters
N/A
Default Configuration
Disabled
Command Mode
Global Configuration mode
Name Description Start
Message
Stop Message
task_id A unique accounting session
identifier.
Yes Yes
user username that is entered for
login authentication
Yes Yes
rem-addr IP address.of the user Yes Yes
elapsed-time Indicates how long the user
was logged in.
No Yes
reason Reports why the session was
terminated.
No Yes