TACACS+ Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1214
63
Example
The following example displays configuration and statistical information for all
TACACS+ servers
switchxxxxxx#
show tacacs
IP address Status Port Single Time Priority
Connection Out
--------- --------- ---- --------- ------ --------
172.16.1.1 Connected 49 No Global 1
Global values
-------------
Time Out: 3
Source IPv4 interface: vlan 120
Source IPv6 interface: vlan 10
63.7 show tacacs key
To display the configured key of the TACACS+ server, use the show tacacs key
Privileged EXEC mode command.
Syntax
show tacacs key [
ip-address
]
Parameters
•
ip-address
—Specifies the TACACS+ server name or IP address.
Default Configuration
If
ip-address
is not specified, information for all TACACS+ servers is displayed.
Command Mode
Privileged EXEC mode
To Next Page
Loading...
