Cisco Sx350

IGMP Commands
475 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
21
Example 2. The following is sample output from the show ip igmp groups
command using the detail keyword:
switchxxxxxx# show ip igmp groups detail
Expires: zero value - INCLUDE state; non-zero value - EXCLUDE state
Interface: VLAN 100
Group: 225.1.1.1
Router mode: INCLUDE
Last reporter: 10.0.119.133
Group Timer Expires: 00:20:11
Group source list:
Source Address Expires
20.1.1.1 00:04:08
120.1.1.1 00:02:01
Group: 226.1.1.2
Router mode: EXCLUDE
Last reporter: 100.1.12.130
Group Timer Expiry: 00:22:12
Exclude Mode Expiry (Filter) Timer: 00:10:11
Group source list:
Source Address Expires
2.2.2.1 00:04:08
192.168.1.1 00:04:08
12.1.1.10 00:00:00
40.3.4.2 00:00:00
21.10 show ip igmp groups summary
To display the number of (*, G) and (S, G) membership reports present in the
Internet Group Management Protocol (IGMP) cache, use the show ip igmp groups
summary command in User EXEC mode.