IGMP Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 474
21
Syntax
show ip igmp groups [
group-name
|
group-address
|
interface-id
] [detail]
Parameters
•
group-name
|
group-address
—(Optional) IP address or name of the
multicast group.
•
interface-id
—(Optional) Interface identifier.
• detail—(Optional) Displays detailed information about individual sources.
Command Mode
User EXEC mode
User Guidelines
Use the show ip igmp groups [detail] command to display all directly connected
groups.
Use the show ip igmp groups [
group-name
|
group-address
] [detail] command to
display one given directly connected group.
Use the show ip igmp groups
interface-id
[detail] command to display all groups
directly connected to the given interface.
Examples
Example 1. The following is sample output from the show ip igmp groups
command. It shows all of the groups joined by VLAN 100:
switchxxxxxx#
show ip igmp groups vlan 100
IGMP Connected Group Membership
Expires: never - switch itself has joined the group
Group Address Interface Expires
224.1.1.1 VLAN 100 00:01:30
224.10.12.79 VLAN 100 never
225.1.1.1 VLAN 100 00:00:27
To Next Page
Loading...
