System Management Commands
1193 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
62
62.9 show inventory
To display system information, use the show inventory EXEC mode command.
Syntax
show inventory [entity]
Parameters
entity—Specifies the entity to be displayed. It can be a number (1 - 8 ) for a
specific unit number, or an interface (Ethernet) name.
Command Mode
User EXEC mode
Examples
Example 1 - The following example displays all the entities in a standalone system.
switchxxxxxx> show inventory
NAME: "1", DESCR: "52-Port Gigabit PoE Stackable Managed Switch"
PID: SRW224G4P-K9, VID: V01, SN: 123456789
Example 2 - The following example displays a specific entity in a standalone
system.
switchxxxxxx> show inventory gigabitethernet2/1/49
NAME: "GigabitEthernet2/1/49", DESCR: "1000M base-LX Mini-GBIC SFP Transceiver"
PID: MGBLX1,VID: V01, SN: AGC1525UR7G
62.10 show reload
To display whether there is a pending reload for status of the device, use the show
reload Privileged EXEC mode command.
Syntax
show reload
To Next Page
Loading...
