Cisco Sx350

MLD Proxy Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 836
41
switchxxxxxx(config-if)# ipv6 mld-proxy vlan 200
switchxxxxxx(config-if)# exit
Example 2. The following example adds a range of downstream interfaces to an
IGMP Proxy process with vlan 200 as its Upstream interface:
switchxxxxxx(config)# interface range vlan 100-105
switchxxxxxx(config-if)# ipv6 mld-proxy vlan 200
switchxxxxxx(config-if)# exit
41.2 ipv6 mld-proxy downstream protected
To disable forwarding of IPv6 Multicast traffic from downstream interfaces, use the
ipv6 mld-proxy downstream protected command in Global Configuration mode.
To allow forwarding from downstream interfaces, use the no form of this
command.
Syntax
ipv6 mld-proxy downstream protected
no ipv6 mld-proxy downstream protected
Parameters
This command has no arguments or keywords.
Default Configuration
Forwarding from downstream interfaces is allowed.
Command Mode
Global Configuration mode
User Guidelines
Use the pv6 mld-proxy downstream protected command to block forwarding from
downstream interfaces.