Cisco Sx350

18
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 417
File System Commands
18.0
18.1 File Specification
The files may be located on:
• Network: TFTP servers and/or SCP servers - Network files
• FLASH - Flash files
• mass-storage connected to a USB port - USB files. Only one mass-storage
is supported.
Uniform Resource Locators (URLs) are used to specify the location of a file or a
directory. The URL has the following syntax:
<url > ::= tftp://< location >/< file-path > |
scp://[<
username >:< password >@]< location >/< file-path > | usb://< file-path > |
flash://<
file-path > | < current-directory >[/< file-path >] |
<
higher-directory >[/< file-path >] | < file-path >
<
username > ::= string up to 70 characters
< password > :: = string up to 70 characters
<
location > ::= < ipv4-address > | < ipv6-address > | < dns-name >
<
current-directory > ::= [{usb | flash}:][.]
< higher-directory > ::= [{usb | flash}:]..
<
file-path > ::= [< directories-path >/]< filename >
<
directories-path > ::= < director y -name > | < directories-path >/< director y -name >
The maximum number of directories in <
directories-path > is 16.
<
director y -name > ::= string up to 63 characters
<
filename > ::= string up to 63 characters
Filenames and directory names consist only of characters from the portable
filename character set. The set includes the following characters: