Cisco Sx350

Link Aggregation Control Protocol (LACP) Commands
759 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
35
35.5 show lacp port-channel
To display LACP information for a port-channel, use the show lacp port-channel
Privileged EXEC mode command.
Syntax
show lacp port-channel
[port_channel_number]
Parameters
port_channel_number—(Optional) Specifies the port-channel number.
Command Mode
Privileged EXEC mode
Port gi1 1 LACP Statistics:
LACP PDUs sent:
LACP PDUs received:
2
2
Port
gi1 1 LACP Protocol State:
LACP State Machines:
Receive FSM:
Mux FSM:
Port Disabled State
Detached State
Control Variables:
BEGIN:
LACP_Enabled:
Ready_N:
Selected:
Port_moved:
NNT:
Port_enabled:
FALSE
TRUE
FALSE
UNSELECTED
FALSE
FALSE
FALSE
Timer counters:
periodic tx timer:
current while timer:
wait while timer:
0
0
0