Power over Ethernet (PoE) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 910
45
(~) Not all samples are available.
* time stamp represents end of sampling period
45.17 show powered-device
To display information about the inline power of PD for all interfaces or for a
specific interface, use the show powered-device privileged EXEC mode
command.
Syntax
show powered-device
[interface-id]
Parameters
Interface-id—Specifies an interface ID. The interface ID must be an Ethernet port.
Default Configuration
Show information for all ports.
Command Mode
Global Configuration mode
Sample
Time
---------------------------
Sun 15/11/2015 00:00:00
Sun 22/11/2015 00:00:00
Sun 29/11/2015 00:00:00(~)
Consumption
(W)
-------------
55.1
75.2
45.3
To Next Page
Loading...
