Cisco Sx350

Power over Ethernet (PoE) Commands
909 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
45
Command Mode
Privileged EXEC mode
User Guidelines
The show power inline monitor is used to show average power consumption for
specified time frame.
Examples
Example 1:
The following example displays the average hourly power consumption for the
past day gathered for interface
gi11 .
switchxxxxxx# show power inline monitor consumption gi11 hours
(~) Not all samples are available.
* time stamp represents end of sampling period
Example 2:
The following example displays the average weekly power consumption for the
past 52 weeks gathered for
entire device.
switchxxxxxx# show power inline monitor consumption weeks
Sample
Time
----------
03:00:00
02:00:00
01:00:00(~)
00:00:00
Consumption
(W)
-------------
7.1
7.1
8.5
9.0