Cisco Sx350

Virtual Local Area Network (VLAN) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1282
67
• vlan-id —Defines the VLAN ID associated with the rule.
Default Configuration
N/A
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
The VLAN classification rule priorities are:
• MAC-based VLAN (Best match among the rules)
• Subnet-based VLAN (Best match among the rules)
• Protocol-based VLAN
• PVID
Example
The following example maps an IP subnet to the group of IP subnets 4. It then
maps this group of IP subnets to VLAN 8
switchxxxxxx(config)# vlan database
switchxxxxxx(config-vlan)# map subnet 172.16.1.1 24 subnets-group 4
switchxxxxxx(config-vlan)#
switchport general map subnets-group 4 vlan 8
67.28 show vlan subnets-groups
Use the show vlan subnets-groups EXEC mode command to display
subnets-groups information.
Syntax
show vlan subnets-groups
Parameters
N/A
Default Configuration
N/A