Cisco Sx350

802.1X Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 122
3
3.34 show dot1x users
To display active 802.1X authorized users for the device, use the show dot1x users
command in Privileged EXEC mode.
Syntax
show dot1x users
[username username ]
Parameters
• username username —Specifies the supplicant username (Length: 1–160
characters).
Default Configuration
Display all users.
Command Mode
Privileged EXEC mode
Examples
Example 1. The following commands displays all 802.1x users:
show dot1x users
Example 2. The following example displays 802.1X user with supplicant username
Bob:
switchxxxxxx# show dot1x users username Bob
Port
----------------
gi1 1
gi1 2
gi1 2
Udsername
---------------
Bob
Allan
John
MAC Address
--------------------
0008.3b71.1111
0008.3b79.8787
0008.3baa.0022
Auth
Method
----------
802.1x
MAC
WBA
Auth
Server
---------
Remote
Remote
Remote
Session
Time
----------
09:01:00
00:11:12
00:27:16
VLAN
-------
1020