Cisco Sx350

Remote Network Monitoring (RMON) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1024
51
51.11 show rmon history
To display RMON Ethernet history statistics, use the show rmon history Privileged
EXEC mode command.
Syntax
show rmon history
index {throughput | errors | other} [period seconds ]
Parameters
• index—Specifies the set of samples to display. (Range: 1–65535)
• throughput—Displays throughput counters.
• errors—Displays error counters.
• other—Displays drop and collision counters.
• period seconds —(Optional) Specifies the period of time in seconds to
display. (Range: 1–2147483647)
Command Mode
Privileged EXEC mode
Example
The following examples display RMON Ethernet history statistics for index 1:
Granted Samples The granted number of samples to be saved.
Owner The entity that configured this entry.
switchxxxxxx# show rmon history 1 throughput
Sample Set: 1
Interface:
gi1 1
Requested samples: 50
Owner: CLI
Interval: 1800
Granted samples: 50
Maximum table size: 500
Time
--------------------
Jan 18 2005 21:57:00
Jan 18 2005 21:57:30
Octets
--------
303595962
287696304
Packets
-------
357568
275686
Broadcast
--------
3289
2789
Multicast
---------
7287
5878
Util
----
19%
20%
Field Description