Cisco Sx350 User Manual

28
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 551
IPv6 Commands
28.0
28.1 clear ipv6 neighbors
Use the clear ipv6 neighbors command in privileged EXEC mode to delete all
entries in the IPv6 neighbor discovery cache, except static entries.
Syntax
clear ipv6 neighbors
Parameters
N/A
Command Mode
Privileged EXEC mode
User Guidelines
Example
The following example deletes all entries, except static entries, in the neighbor
discovery cache:
switchxxxxxx# clear ipv6 neighbors
28.2 ipv6 address
Use the ipv6 address command in Interface Configuration mode to configure a
global unicast IPv6 address based on an IPv6 general prefix and enable IPv6
processing on an interface. To remove the address from the interface, use the no
form of this command.

Cisco Sx350 Specifications

General

Brand	Cisco
Model	Sx350
Category	Switch
Language	English