Cisco Sx350

Quality of Service (QoS) Commands
945 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
47
no qos wrr-queue wrtd
Parameters
N/A
Default
Disabled
Command Mode
Global Configuration mode
User Guidelines
The command is effective after reset.
Example
switchxxxxxx(config)# qos wrr-queue wrtd
This setting will take effect only after copying running configuration to startu
p configuration and resetting the device
switchxxxxxx(config)#
47.25 show qos wrr-queue wrtd
Use the show qos wrr-queue wrtd Privileged EXEC mode command to display the
Weighted Random Tail Drop (WRTD) configuration.
Syntax
show qos wrr-queue wrtd
Parameters
N/A
Default Configuration
N/A