Cisco Sx350

Ethernet Configuration Commands
399 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
17
Default Configuration
None.
Command Mode
Privileged EXEC mode
Examples
Example 1
— The following example reactivates interface gi11:
switchxxxxxx# errdisable recovery reset interface gi11
Example 2 — The following example reactivates all interfaces regardless their
state:
switchxxxxxx# errdisable recovery reset all
Example 3 — The following example enables all interfaces in the port security
Err-Disable state
switchxxxxxx# errdisable recovery reset port-security
17.19 show interfaces configuration
To display the configuration for all configured interfaces or for a specific interface,
use the show interfaces configuration Privileged EXEC mode command.
Syntax
show interfaces configuration
[interface-id | detailed ]
Parameters
• interface-id—(Optional) Specifies an interface ID. The interface ID can be
one of the following types: Ethernet port or port-channel.