Cisco Sx350

Virtual Local Area Network (VLAN) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1290
67
User Guidelines
The show vlan private-vlan command does not include non-private VLAN ports
that are members in private VLANs. Tag parameters of non-primary VLAN will
result in an empty show output.
Example
switchxxxxxx# show vlan private-vlan
Primary Secondary Type Ports
----------- ----------- ----------- ----------------------
150 primary gi11
150 151 isolated gi12
160 primary gi13
160 161 community gi14
switchxxxxxx# show vlan private-vlan 150
Primary Secondary Type Ports
----------- ----------- ----------- ----------------------
150 primary gi11
150 151 isolated gi14
67.35 switchport access multicast-tv vlan
To assign a Multicast-TV VLAN to an access port, use the switchport access
multicast-tv vlan command in Interface (Ethernet, Port Channel) Configuration
mode. To return to the default, use the no format of the command.
Syntax
switchport access multicast-tv vlan
vlan-id
no switchport access multicast-tv vlan
Parameters
• vlan-id —Specifies the Multicast TV VLAN ID.