Cisco Sx350 - Show Users Accounts

Authentication, Authorization and Accounting (AAA) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 184
5
Examples
Example 1 - Sets an unencrypted password for user tom (level 15). It will be
encrypted in the configuration file.
switchxxxxxx(config)# username tom password 1234
Example 2 - Sets a password for user jerry (level 15) that has already been
encrypted. It will be copied to the configuration file just as it is entered. To use it,
the user must know its unencrypted form.
switchxxxxxx(config)# username jerry privilege 15 encrypted
4b529f21c93d4706090285b0c10172eb073ffebc4
5.11 show users accounts
The show users accounts Privileged EXEC mode command displays information
about the users local database.
Syntax
show users accounts
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
The following example displays information about the users local database: