Cisco Sx350

IPv6 Prefix List Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 732
31
switchxxxxxx(config)# ipv6 prefix-list abc permit 5F00::/48 le 64
Example 4. The following example denies prefix lengths greater than 64 bits in
routes that have the prefix 2001:0DB8::/64:
switchxxxxxx(config)# ipv6 prefix-list abc permit 2001:0DB8::/64 le 128
Example 5. The following example permits mask lengths from 32 to 64 bits in all
address space:
switchxxxxxx(config)# ipv6 prefix-list abc permit ::/0 ge 32 le 64
Example 6. The following example denies mask lengths greater than 32 bits in all
address space:
switchxxxxxx(config)# ipv6 prefix-list abc deny ::/0 ge 32
Example 7. The following example denies all routes with a prefix of 2002::/128:
switchxxxxxx(config)# ipv6 prefix-list abc deny 2002::/128
Example 8. The following example permits all routes with a prefix of ::/0:
switchxxxxxx(config)# ipv6 prefix-list abc permit ::/0
31.3 show ipv6 prefix-list
Use the show ipv6 prefix-list command in user EXEC or privileged EXEC mode. to
display information about an IPv6 prefix list or IPv6 prefix list entries.
Syntax
show ipv6 prefix-list [detail [
list-name ] | summary [ list-name ]]
show ipv6 prefix-list
list-name ipv6-prefix / prefix-length [longer | first-match]