Address Table Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 164
4
4.30 show bridge multicast filtering
To display the Multicast filtering configuration, use the show bridge multicast
filtering Privileged EXEC mode command.
Syntax
show bridge multicast filtering
vlan-id
Parameters
vlan-id—Specifies the VLAN ID. (Range: Valid VLAN)
Default Configuration
None
Vlan
----
191
IP Address
----------------
FF12::8
Ports
---------
gi11-4
Forbidden ports for multicast addresses:
Vlan
----
11
191
IP Address
----------------
FF12::3
FF12::8
Ports
---------
gi14
gi14
IPv6-SRC-GROUP Table:
Vlan
----
192
Group Address
---------------
FF12::8
Source address
---------------
FE80::201:C9A9:FE40:
8988
Ports
------
gi11-4
Forbidden ports for multicast addresses:
Vlan
----
192
Group Address
---------------
FF12::3
Source address
---------------
FE80::201:C9A9:FE40
:8988
Ports
------
gi1
4