Cisco Sx350 User Manual

IGMP Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 476
21
Syntax
show ip igmp groups summary
Parameters
This command has no arguments or keywords.
Command Mode
User EXEC mode
User Guidelines
The show ip igmp groups summary command displays the number of directly
connected multicast groups.
Example
The following is sample output from the show ip igmp groups summary command:
switchxxxxxx# show ip igmp groups summary
IGMP Route Summary
No. of (*,G) routes = 5
No. of (S,G) routes = 0
Field Descriptions:
No. of (*,G) routes = 5 — Displays the number of groups present in the IGMP cache.
No. of (S,G) routes = 0 — Displays the number of include and exclude mode sources present in the IGMP
cache.
21.11 show ip igmp interface
To display multicast-related information about an interface, use the show ip igmp
interface command in User EXEC mode.

Cisco Sx350 Specifications

General

Brand	Cisco
Model	Sx350
Category	Switch
Language	English