Cisco Sx350

61
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1167
SYSLOG Commands
61.0
61.1 aaa logging
To enable logging AAA logins, use the aaa logging Global Configuration mode
command. To disable logging AAA logins, use the no form of this command.
Syntax
aaa logging
{ login}
no aaa logging {login}
Parameters
login—Enables logging messages related to successful AAA login events,
unsuccessful AAA login events and other AAA login-related events.
Default Configuration
Enabled.
Command Mode
Global Configuration mode
User Guidelines
This command enables logging messages related to successful login events,
unsuccessful login events and other login-related events. Other types of AAA
events are not subject to this command.
Example
The following example enables logging AAA login events.
switchxxxxxx(config)# aaa logging login