Cisco Sx350 User Manual

System Management Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1188
62
Parameters
connection—(Optional) Specifies the connection number. (Range: 1-4
connections.)
Default Configuration
The default connection number is that of the most recent connection.
Command Mode
Privileged EXEC mode
Example
The following command switches to open Telnet session number 1.
switchxxxxxx> resume 1
62.5 service cpu-utilization
To enable measuring CPU utilization, use the service cpu-utilization Global
Configuration mode command. To restore the default configuration, use the no
form of this command.
Syntax
service cpu-utilization
no service cpu-utilization
Parameters
This command has no arguments or keywords.
Default Configuration
Measuring CPU utilization is enabled.
Command Mode
Global Configuration mode

Cisco Sx350 Specifications

General

Brand	Cisco
Model	Sx350
Category	Switch
Language	English